An air filter change indicator can potentially save you hundreds of dollars on replacement air filters and can even lead to reduced operating costs for your air conditioner, heat pump or furnace.

How is this possible?

• Change your furnace filter or air conditioner filter too often and it’s like throwing money away.
• Wait too long between filter changes and equipment operating efficiency begins to decline.

How often should an air filter be changed?

Manufacturers often differ in their recommended filter change frequency. Some say every month, some say every other month and others recommend every three months and that’s only for 1 and 2 inch filters. If you use 4, 5 or 6 inch pleated air filters, recommendations vary from 3 months to a year.

Filters are expensive, especially the efficient varieties and the 4, 5 and 6 inch types so you don’t want to be changing them more often than absolutely necessary. It’s very difficult to know when a filter has reached the point where it is better to change it than to leave it in the system.

Manufacturers can’t really tell you because they can’t possibly know the conditions in every home, not to mention every geographic area. There are just too many variables to consider. If you follow a set schedule for your filter changes you are probably not getting the best value from your filters.

Leaving an air filter in your heating or air conditioning system too long costs money

If you don’t replace you air filter often enough it begins to impact air flow and causes equipment operating efficiency to decline. A decrease in operating efficiency translates to higher operating costs. This means higher energy bills and nobody wants that either.

If left in a system long enough, a dirty filter will cause air flow restriction and can cause evaporator coils to ice up, heat exchangers to crack, longer run times and other equipment troubles that may require a service technician.

So what’s the solution?

Installing an air filter change indicator eliminates the guessing from filter change schedules. You won’t be throwing money away by changing filters too often and you won’t be wasting money and dealing with the potential problems associated with leaving an air filter in too long.

More about air filter change indicators.

Question: How often do you need to change your air conditioning filter?

Changing your air conditioner filter or furnace filter is the most important maintenance task there is if you want to keep your equipment operating at maximum efficiency.  Allowing an air conditioner filter to become so dirty that it begins to restrict air flow can cause evaporator coils to ice up, operating efficiency will decrease and even prevent the unit from maintaining the desired space temperature.

The easy answer to this question is every three months and you should not have any problems.  But there are really many variables to consider when trying to provide an accurate answer to this question.  Often sales people can quote efficiency ratings or MERV ratings and provide you with their standard recommendation but they often don’t really understand how air conditioners operate.

Here are a couple of articles I wrote about this topic.  The first one I wrote today.  The second one I wrote some time ago but found it only after I wrote the one today.  Anyway, they are similar but each provide some different information.  Please leave comments or email questions if you have any.

When To Change Your Air Conditioner Filter
Selecting And Maintaining Your Air Conditioner Filter

Question: I have a Water Furnace and currently use a pleated filter with a MERV 5 rating.  how high can I go before I start restricting the flow too much and damage the system?

A Merv 5 filter is really not very efficient.  If you have a properly sized duct system and you change your air filter regularly I see no reason not to use an air filter with as high as a Merv 12 rating.  as Merv ratings increase so does restriction to air flow, so you always have to be careful.  The reason I mention a properly sized duct system is because if the duct system is undersized it will restrict air flow dramatically and is a common problem in many homes.  A very efficient air filter and an undersized duct system are not a good combination.

There are a couple of signs that may indicate an undersized duct system:

-  The air conditioner coil ices up when the filter becomes dirty.  Most systems will do this if the filter becomes extremely dirty but you should not have this problem if the filter becomes only moderately dirty and you change it regularly.

- Whistling sounds coming from around the air handler access panels can be an indication of an undersized duct system.  This can also indicate poorly fitting access panels.

- If your furnace trips of on the high limit switch, this could indicate an undersized duct system.

There are other things that could cause the problems listed above but they are also signs of restricted air flow.

If you have your equipment serviced regularly ask your contractor if the duct is sized properly.  Opinions vary among contractors regarding filters with high Merv ratings.  Your other option is to try a higher Merv rating and monitor equipment operation closely.